← Catàleg
Passeu el cursor per sobre de la imatge per ampliar-la
3191
Ball nose hard profile cutter GF 300 B
Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 3.175 mm – 15.875 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093665711, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 30, Back rake angle: -7, Length picto milling: extra long, Number of cutting edges range (from/to): 2, Feed direction: with drilling
Especificacions tècniques
- EAN
- 4031093665711
- Type
- H
- Surface
- Signum
- Designation
- Ball nose hard profile cutter GF 300 B
- Helix angle
- 30
- Diameter range
- 3.175 mm – 15.875 mm
- Feed direction
- with drilling
- Back rake angle
- -7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- extra long
- Number of cutting edges range (from/to)
- 2
Dimensions i codis de comanda
| Codi de comanda | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilitat | Sol·licitar preu |
|---|---|---|---|---|---|---|---|
| 3191 7.940 | 17.53 mm | 38.10 mm | 76.20 mm | 7.94 mm | 7.94 mm | A petició | |
| 3191 3.170 | 7.64 mm | 38.10 mm | 63.50 mm | 6.35 mm | 3.17 mm | A petició | |
| 3191 4.760 | 10.52 mm | 38.10 mm | 63.50 mm | 6.35 mm | 4.76 mm | A petició | |
| 3191 12.700 | 27.94 mm | 44.45 mm | 114.30 mm | 12.70 mm | 12.70 mm | A petició | |
| 3191 9.520 | 20.93 mm | 38.10 mm | 76.20 mm | 9.53 mm | 9.53 mm | A petició | |
| 3191 15.870 | 35.05 mm | 50.80 mm | 127.00 mm | 15.88 mm | 15.88 mm | A petició | |
| 3191 6.350 | 14.12 mm | 38.10 mm | 76.20 mm | 6.35 mm | 6.35 mm | A petició |