← Catàleg
Passeu el cursor per sobre de la imatge per ampliar-la
19970
Ball nose slot drill XL (2-fluted)
Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844216853, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: medium, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling
Especificacions tècniques
- EAN
- 4049844216853
- Type
- N
- Designation
- Ball nose slot drill XL (2-fluted)
- Helix angle
- 30
- Diameter range
- 3.000 mm – 12.000 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- medium
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 2
Dimensions i codis de comanda
| Codi de comanda | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilitat | Sol·licitar preu |
|---|---|---|---|---|---|---|---|
| 19970 8.000 | 39.20 mm | 36.00 mm | 75.00 mm | 8.00 mm | 8.00 mm | A petició | |
| 19970 5.000 | 31.25 mm | 28.00 mm | 75.00 mm | 5.00 mm | 5.00 mm | A petició | |
| 19970 3.000 | 23.75 mm | 28.00 mm | 60.00 mm | 3.00 mm | 3.00 mm | A petició | |
| 19970 6.000 | 37.50 mm | 36.00 mm | 75.00 mm | 6.00 mm | 6.00 mm | A petició | |
| 19970 10.000 | 50.50 mm | 40.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | A petició | |
| 19970 12.000 | 57.60 mm | 45.00 mm | 100.00 mm | 12.00 mm | 12.00 mm | A petició | |
| 19970 4.000 | 25.00 mm | 28.00 mm | 60.00 mm | 4.00 mm | 4.00 mm | A petició |