← Catàleg
Passeu el cursor per sobre de la imatge per ampliar-la
19960
End mill (4-fluted)
End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"full"}], EAN: 4049844291010, Cutting material: Solid carbide, Type: H, Helix angle: 20, Length picto milling: long, Number of cutting edges range (from/to): 3-4, Type of machine interface: Cyl
Especificacions tècniques
- EAN
- 4049844291010
- Type
- H
- Designation
- End mill (4-fluted)
- Helix angle
- 20
- Diameter range
- 6.350 mm – 25.400 mm
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"full"}]
- Length picto milling
- long
- Type of machine interface
- Cyl
- Number of cutting edges range (from/to)
- 3-4
Dimensions i codis de comanda
| Codi de comanda | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilitat | Sol·licitar preu |
|---|---|---|---|---|---|---|---|
| 19960 19.050 | 52.00 mm | 49.60 mm | 101.60 mm | 19.05 mm | 19.05 mm | A petició | |
| 19960 11.110 | 34.50 mm | 35.35 mm | 69.85 mm | 11.11 mm | 11.11 mm | A petició | |
| 19960 7.940 | 27.00 mm | 36.50 mm | 63.50 mm | 7.94 mm | 7.94 mm | A petició | |
| 19960 15.870 | 44.00 mm | 44.90 mm | 88.90 mm | 15.88 mm | 15.88 mm | A petició | |
| 19960 9.520 | 33.50 mm | 30.00 mm | 63.50 mm | 9.53 mm | 9.53 mm | A petició | |
| 19960 25.400 | 56.00 mm | 45.60 mm | 101.60 mm | 25.40 mm | 25.40 mm | A petició | |
| 19960 12.700 | 36.50 mm | 39.70 mm | 76.20 mm | 12.70 mm | 12.70 mm | A petició | |
| 19960 6.350 | 25.50 mm | 38.00 mm | 63.50 mm | 6.35 mm | 6.35 mm | A petició |