← Catàleg
Passeu el cursor per sobre de la imatge per ampliar-la
3095
End mill (4-fluted)
End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4031093762892, Cutting material: Solid carbide, Product family: RF 50, Helix angle: 40, Back rake angle: 4, Length picto milling: short, Number of cutting edges range (from/to): 4, Type of machine interface: ~HB, Corner design: Schneidecke 90°, Feed direction: with drilling
Especificacions tècniques
- EAN
- 4031093762892
- Designation
- End mill (4-fluted)
- Helix angle
- 40
- Corner design
- Schneidecke 90°
- Diameter range
- 4.763 mm – 19.050 mm
- Feed direction
- with drilling
- Product family
- RF 50
- Back rake angle
- 4
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
- Length picto milling
- short
- Type of machine interface
- ~HB
- Number of cutting edges range (from/to)
- 4
Dimensions i codis de comanda
| Codi de comanda | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilitat | Sol·licitar preu |
|---|---|---|---|---|---|---|---|
| 3095 7.940 | 17.70 mm | 33.10 mm | 50.80 mm | 7.94 mm | 7.94 mm | A petició | |
| 3095 19.050 | 37.50 mm | 51.60 mm | 76.20 mm | 19.05 mm | 19.05 mm | A petició | |
| 3095 4.760 | 13.00 mm | 37.80 mm | 50.80 mm | 4.76 mm | 4.76 mm | A petició | |
| 3095 6.350 | 17.70 mm | 33.10 mm | 50.80 mm | 6.35 mm | 6.35 mm | A petició | |
| 3095 15.870 | 29.00 mm | 48.40 mm | 76.20 mm | 15.88 mm | 15.88 mm | A petició | |
| 3095 9.520 | 22.00 mm | 28.80 mm | 50.80 mm | 9.53 mm | 9.53 mm | A petició | |
| 3095 12.700 | 25.00 mm | 45.20 mm | 63.50 mm | 12.70 mm | 12.70 mm | A petició |