← Catàleg
Passeu el cursor per sobre de la imatge per ampliar-la
6839
Hard multi-tooth end mill GH 100 H
Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4049844501249, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 42, Back rake angle: -3, Length picto milling: long, Number of cutting edges range (from/to): 6, Type of machine interface: Cyl
Especificacions tècniques
- EAN
- 4049844501249
- Type
- H
- Surface
- Signum
- Designation
- Hard multi-tooth end mill GH 100 H
- Helix angle
- 42
- Diameter range
- 6.350 mm – 19.050 mm
- Back rake angle
- -3
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- long
- Type of machine interface
- Cyl
- Number of cutting edges range (from/to)
- 6
Dimensions i codis de comanda
| Codi de comanda | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilitat | Sol·licitar preu |
|---|---|---|---|---|---|---|---|
| 6839 12.700 | 31.21 mm | 43.50 mm | 76.20 mm | 12.70 mm | 12.70 mm | A petició | |
| 6839 7.940 | 25.77 mm | 36.00 mm | 63.50 mm | 7.94 mm | 7.94 mm | A petició | |
| 6839 6.350 | 21.86 mm | 35.00 mm | 63.50 mm | 6.35 mm | 6.35 mm | A petició | |
| 6839 9.520 | 26.49 mm | 36.00 mm | 63.50 mm | 9.53 mm | 9.53 mm | A petició | |
| 6839 15.870 | 39.14 mm | 48.30 mm | 88.90 mm | 15.88 mm | 15.88 mm | A petició | |
| 6839 19.050 | 46.57 mm | 51.60 mm | 101.60 mm | 19.05 mm | 19.05 mm | A petició |