← Catàleg
Passeu el cursor per sobre de la imatge per ampliar-la
3121
Morse taper end mill
Morse taper end mill. Designation: Morse taper end mill, Diameter range: 16.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093368605, Cutting material: HSCO, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 11, Length picto milling: medium, Number of cutting edges range (from/to): 4-8, Type of machine interface: MK, Corner design: Schneidecke 90°, Feed direction: lateral
Especificacions tècniques
- EAN
- 4031093368605
- Type
- N
- Surface
- bright
- Designation
- Morse taper end mill
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 16.000 mm – 50.000 mm
- Feed direction
- lateral
- Back rake angle
- 11
- Cutting material
- HSCO
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- medium
- Type of machine interface
- MK
- Number of cutting edges range (from/to)
- 4-8
Dimensions i codis de comanda
| Codi de comanda | Flute length | Total length | Nominal diameter | Disponibilitat | Sol·licitar preu |
|---|---|---|---|---|---|
| 3121 36.000 | 126.00 mm | 254.00 mm | 36.00 mm | A petició | |
| 3121 50.000 | 175.00 mm | 336.00 mm | 50.00 mm | A petició | |
| 3121 30.000 | 98.00 mm | 192.00 mm | 30.00 mm | A petició | |
| 3121 40.000 | 145.00 mm | 273.00 mm | 40.00 mm | A petició | |
| 3121 16.000 | 71.00 mm | 148.00 mm | 16.00 mm | A petició | |
| 3121 28.000 | 98.00 mm | 192.00 mm | 28.00 mm | A petició | |
| 3121 20.000 | 83.00 mm | 160.00 mm | 20.00 mm | A petició | |
| 3121 32.000 | 126.00 mm | 254.00 mm | 32.00 mm | A petició | |
| 3121 25.000 | 98.00 mm | 192.00 mm | 25.00 mm | A petició |