← Catàleg
Passeu el cursor per sobre de la imatge per ampliar-la
3178
Multi-tooth end mill GH 100 U
Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093663458, Cutting material: Solid carbide, Surface: bright, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 6-10
Especificacions tècniques
- EAN
- 4031093663458
- Type
- N
- Surface
- bright
- Designation
- Multi-tooth end mill GH 100 U
- Helix angle
- 45
- Diameter range
- 6.350 mm – 25.400 mm
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Number of cutting edges range (from/to)
- 6-10
Dimensions i codis de comanda
| Codi de comanda | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilitat | Sol·licitar preu |
|---|---|---|---|---|---|---|---|
| 3178 15.870 | 38.35 mm | 50.55 mm | 88.90 mm | 15.88 mm | 15.88 mm | A petició | |
| 3178 9.520 | 26.01 mm | 37.49 mm | 63.50 mm | 9.53 mm | 9.53 mm | A petició | |
| 3178 25.400 | 46.38 mm | 55.22 mm | 101.60 mm | 25.40 mm | 25.40 mm | A petició | |
| 3178 12.700 | 30.58 mm | 45.62 mm | 76.20 mm | 12.70 mm | 12.70 mm | A petició | |
| 3178 7.940 | 25.38 mm | 38.13 mm | 63.50 mm | 7.94 mm | 7.94 mm | A petició | |
| 3178 6.350 | 21.54 mm | 41.96 mm | 63.50 mm | 6.35 mm | 6.35 mm | A petició | |
| 3178 19.050 | 44.29 mm | 57.31 mm | 101.60 mm | 19.05 mm | 19.05 mm | A petició |