← Catàleg
Passeu el cursor per sobre de la imatge per ampliar-la
3177
Slot drill GA 200 A (3-fluted)
Slot drill GA 200 A (3-fluted). Designation: Slot drill GA 200 A (3-fluted), Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093665421, Cutting material: Solid carbide, Surface: bright, Type: W, Helix angle: 45, Back rake angle: 15, Length picto milling: extra long, Number of cutting edges range (from/to): 3, Feed direction: with drilling
Especificacions tècniques
- EAN
- 4031093665421
- Type
- W
- Surface
- bright
- Designation
- Slot drill GA 200 A (3-fluted)
- Helix angle
- 45
- Diameter range
- 6.350 mm – 19.050 mm
- Feed direction
- with drilling
- Back rake angle
- 15
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- extra long
- Number of cutting edges range (from/to)
- 3
Dimensions i codis de comanda
| Codi de comanda | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilitat | Sol·licitar preu |
|---|---|---|---|---|---|---|---|
| 3177 12.700 | 29.00 mm | 44.45 mm | 114.30 mm | 12.70 mm | 12.70 mm | A petició | |
| 3177 7.940 | 18.00 mm | 38.10 mm | 76.20 mm | 7.94 mm | 7.94 mm | A petició | |
| 3177 15.870 | 33.20 mm | 50.80 mm | 127.00 mm | 15.88 mm | 15.88 mm | A petició | |
| 3177 19.050 | 39.50 mm | 50.80 mm | 127.00 mm | 19.05 mm | 19.05 mm | A petició | |
| 3177 6.350 | 16.50 mm | 38.10 mm | 76.20 mm | 6.35 mm | 6.35 mm | A petició | |
| 3177 9.520 | 22.30 mm | 38.10 mm | 76.20 mm | 9.53 mm | 9.53 mm | A petició |