End mill CR 200 for fibre-reinforced plastics

End mill CR 200 for fibre-reinforced plastics. Designation: End mill CR 200 for fibre-reinforced plastics, Diameter range: 4.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4069941022645, Indicator new/addition: New, Cutting material: Solid carbide, Surface: Cristall M, Product family: CR 200, Helix angle: 5, Back rake angle: 10, Length picto milling: long, Number of cutting edges range (from/to): 6-8, Feed direction: with drilling

Տեխնիկական բնութագրեր

EAN: 4069941022645
Surface: Cristall M
Designation: End mill CR 200 for fibre-reinforced plastics
Helix angle: 5
Diameter range: 4.000 mm – 12.700 mm
Feed direction: with drilling
Product family: CR 200
Back rake angle: 10
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Indicator new/addition: New
Number of cutting edges range (from/to): 6-8

Չափսեր և պատվերի կոդեր

Պատվերի կոդ	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Առկայություն
6930 12.000	45.01 mm	45.00 mm	93.00 mm	12.00 mm	12.00 mm	Ըստ հարցման
6930 10.000	41.83 mm	40.00 mm	85.00 mm	10.00 mm	10.00 mm	Ըստ հարցման
6930 4.000	20.90 mm	36.00 mm	66.00 mm	6.00 mm	4.00 mm	Ըստ հարցման
6930 8.000	36.05 mm	36.00 mm	75.00 mm	8.00 mm	8.00 mm	Ըստ հարցման
6930 6.000	28.16 mm	36.00 mm	70.00 mm	6.00 mm	6.00 mm	Ըստ հարցման
6930 9.525	37.50 mm	36.00 mm	76.00 mm	9.53 mm	9.53 mm	Ըստ հարցման
6930 6.350	28.81 mm	35.00 mm	70.00 mm	6.35 mm	6.35 mm	Ըստ հարցման
6930 4.762	21.10 mm	35.00 mm	63.50 mm	6.35 mm	4.76 mm	Ըստ հարցման
6930 12.700	40.50 mm	45.20 mm	88.90 mm	12.70 mm	12.70 mm	Ըստ հարցման