Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844219908, Cutting material: Solid carbide, Surface: bright, Type: W, Helix angle: 35, Back rake angle: 15, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: ~HB/HB, Corner design: Schneidecke 90°, Feed direction: with drilling

Technische Daten

EAN: 4049844219908
Type: W
Surface: bright
Designation: Al slot drill (2-fluted)
Helix angle: 35
Corner design: Schneidecke 90°
Diameter range: 4.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 15
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: ~HB/HB
Number of cutting edges range (from/to): 2

Abmessungen und Bestellnummern

Bestellnummer	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Verfügbarkeit
19997 4.000	15.50 mm	57.00 mm	57.00 mm	6.00 mm	4.00 mm	Auf Anfrage
19997 5.000	18.50 mm	57.00 mm	57.00 mm	6.00 mm	5.00 mm	Auf Anfrage
19997 6.000	20.00 mm	57.00 mm	57.00 mm	6.00 mm	6.00 mm	Auf Anfrage
19997 16.000	48.00 mm	95.00 mm	92.00 mm	16.00 mm	16.00 mm	Auf Anfrage
19997 12.000	39.00 mm	86.00 mm	83.00 mm	12.00 mm	12.00 mm	Auf Anfrage
19997 20.000	57.00 mm	15.00 mm	104.00 mm	20.00 mm	20.00 mm	Auf Anfrage
19997 8.000	27.00 mm	7.00 mm	63.00 mm	8.00 mm	8.00 mm	Auf Anfrage
19997 10.000	32.00 mm	75.00 mm	72.00 mm	10.00 mm	10.00 mm	Auf Anfrage
19997 18.000	49.00 mm	94.00 mm	92.00 mm	18.00 mm	18.00 mm	Auf Anfrage
19997 14.000	40.00 mm	85.00 mm	83.00 mm	14.00 mm	14.00 mm	Auf Anfrage