← Katalog
Mit der Maus über das Bild fahren zum Vergrößern
3115
Ratio end mill Superfinish RF 100 SF
Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 7.938 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093732468, Cutting material: Solid carbide, Type: N, Helix angle: 44/45/46, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 6
Technische Daten
- EAN
- 4031093732468
- Type
- N
- Designation
- Ratio end mill Superfinish RF 100 SF
- Helix angle
- 44/45/46
- Diameter range
- 7.938 mm – 25.400 mm
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Number of cutting edges range (from/to)
- 6
Abmessungen und Bestellnummern
| Bestellnummer | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Verfügbarkeit | Preis anfragen |
|---|---|---|---|---|---|---|---|
| 3115 12.700 | 31.50 mm | 44.70 mm | 76.20 mm | 12.70 mm | 12.70 mm | Auf Anfrage | |
| 3115 19.050 | 46.00 mm | 55.60 mm | 101.60 mm | 19.05 mm | 19.05 mm | Auf Anfrage | |
| 3115 25.400 | 48.00 mm | 53.60 mm | 101.60 mm | 25.40 mm | 25.40 mm | Auf Anfrage | |
| 3115 15.870 | 39.00 mm | 49.90 mm | 88.90 mm | 15.88 mm | 15.88 mm | Auf Anfrage | |
| 3115 7.940 | 25.50 mm | 38.00 mm | 63.50 mm | 7.94 mm | 7.94 mm | Auf Anfrage | |
| 3115 9.520 | 31.50 mm | 32.00 mm | 63.50 mm | 9.53 mm | 9.53 mm | Auf Anfrage |