Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844217010, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: ~HA/HA, Feed direction: with drilling

Technische specificaties

EAN: 4049844217010
Type: N
Designation: Ball nose slot drill (2-fluted)
Helix angle: 30
Diameter range: 2.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: ~HA/HA
Number of cutting edges range (from/to): 2

Afmetingen en bestelcodes

Bestelcode	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Beschikbaarheid
19968 18.000	50.00 mm	48.00 mm	100.00 mm	18.00 mm	18.00 mm	Op aanvraag
19968 6.000	17.50 mm	30.00 mm	50.00 mm	6.00 mm	6.00 mm	Op aanvraag
19968 2.000	8.50 mm	27.40 mm	40.00 mm	4.00 mm	2.00 mm	Op aanvraag
19968 4.000	13.00 mm	33.90 mm	50.00 mm	6.00 mm	4.00 mm	Op aanvraag
19968 20.000	52.00 mm	50.00 mm	100.00 mm	20.00 mm	20.00 mm	Op aanvraag
19968 3.000	10.75 mm	37.00 mm	50.00 mm	4.00 mm	3.00 mm	Op aanvraag
19968 10.000	32.50 mm	40.00 mm	70.00 mm	10.00 mm	10.00 mm	Op aanvraag
19968 8.000	28.20 mm	33.00 mm	60.00 mm	8.00 mm	8.00 mm	Op aanvraag
19968 14.000	40.00 mm	35.00 mm	75.00 mm	14.00 mm	14.00 mm	Op aanvraag
19968 5.000	16.25 mm	31.50 mm	50.00 mm	6.00 mm	5.00 mm	Op aanvraag
19968 12.000	38.60 mm	36.00 mm	75.00 mm	12.00 mm	12.00 mm	Op aanvraag
19968 16.000	42.00 mm	32.00 mm	75.00 mm	16.00 mm	16.00 mm	Op aanvraag