Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844198944, Cutting material: Solid carbide, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 6, Type of machine interface: ~HA/HA, Corner design: Schneidecke 90°

Technische specificaties

EAN: 4049844198944
Type: N
Designation: Multi-tooth end mill (6-fluted)
Helix angle: 45
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Back rake angle: 7
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: ~HA/HA
Number of cutting edges range (from/to): 6

Afmetingen en bestelcodes

Bestelcode	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Beschikbaarheid
19972 6.000	15.40 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Op aanvraag
19972 20.000	44.60 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Op aanvraag
19972 10.000	26.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Op aanvraag
19972 14.000	31.60 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Op aanvraag
19972 4.000	12.60 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Op aanvraag
19972 18.000	37.94 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Op aanvraag
19972 5.000	15.00 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Op aanvraag
19972 8.000	22.20 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Op aanvraag
19972 16.000	38.40 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Op aanvraag
19972 12.000	30.80 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Op aanvraag
19972 3.000	11.20 mm	—	50.00 mm	4.00 mm	3.00 mm	Op aanvraag