← Catalogus
Beweeg over de afbeelding om in te zoomen
8241
Ratio end mill RF 100 AL
Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844786653, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 A, Helix angle: 39/40/41, Back rake angle: 13, Length picto milling: 6xD, Number of cutting edges range (from/to): 3, Type of machine interface: ~HB/HB, Feed direction: with drilling
Technische specificaties
- EAN
- 4049844786653
- Surface
- bright
- Designation
- Ratio end mill RF 100 AL
- Helix angle
- 39/40/41
- Diameter range
- 3.500 mm – 20.000 mm
- Feed direction
- with drilling
- Product family
- RF 100 A
- Back rake angle
- 13
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- 6xD
- Type of machine interface
- ~HB/HB
- Number of cutting edges range (from/to)
- 3
Afmetingen en bestelcodes
| Bestelcode | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Beschikbaarheid | Prijs aanvragen |
|---|---|---|---|---|---|---|---|
| 8241 3.500 | 15.23 mm | 36.00 mm | 75.00 mm | 6.00 mm | 3.50 mm | Op aanvraag | |
| 8241 4.500 | 18.27 mm | 36.00 mm | 75.00 mm | 6.00 mm | 4.50 mm | Op aanvraag | |
| 8241 12.000 | 36.20 mm | 45.00 mm | 120.00 mm | 12.00 mm | 12.00 mm | Op aanvraag | |
| 8241 6.000 | 19.48 mm | 36.00 mm | 75.00 mm | 6.00 mm | 6.00 mm | Op aanvraag | |
| 8241 7.500 | 25.75 mm | 36.00 mm | 86.00 mm | 8.00 mm | 7.50 mm | Op aanvraag | |
| 8241 5.000 | 18.55 mm | 36.00 mm | 75.00 mm | 6.00 mm | 5.00 mm | Op aanvraag | |
| 8241 11.500 | 35.77 mm | 45.00 mm | 120.00 mm | 12.00 mm | 11.50 mm | Op aanvraag | |
| 8241 20.000 | 54.40 mm | 50.00 mm | 175.00 mm | 20.00 mm | 20.00 mm | Op aanvraag | |
| 8241 5.500 | 19.11 mm | 36.00 mm | 75.00 mm | 6.00 mm | 5.50 mm | Op aanvraag | |
| 8241 8.000 | 26.20 mm | 36.00 mm | 86.00 mm | 8.00 mm | 8.00 mm | Op aanvraag | |
| 8241 16.000 | 45.60 mm | 48.00 mm | 150.00 mm | 16.00 mm | 16.00 mm | Op aanvraag | |
| 8241 14.000 | 37.90 mm | 45.00 mm | 150.00 mm | 14.00 mm | 14.00 mm | Op aanvraag | |
| 8241 4.000 | 15.84 mm | 36.00 mm | 75.00 mm | 6.00 mm | 4.00 mm | Op aanvraag | |
| 8241 9.500 | 30.55 mm | 39.30 mm | 100.00 mm | 10.00 mm | 9.50 mm | Op aanvraag | |
| 8241 10.000 | 31.00 mm | 39.10 mm | 100.00 mm | 10.00 mm | 10.00 mm | Op aanvraag |