Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093719476, Cutting material: Solid carbide, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4-5, Type of machine interface: HB, Feed direction: with drilling

Technische specificaties

EAN: 4031093719476
Type: N
Surface: bright
Designation: Roughing end mill GS 100 U(fine teeth)
Helix angle: 30
Diameter range: 6.000 mm – 25.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HB
Number of cutting edges range (from/to): 4-5

Afmetingen en bestelcodes

Bestelcode	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Beschikbaarheid
3204 18.001	48.00 mm	50.00 mm	104.00 mm	20.00 mm	18.00 mm	Op aanvraag
3204 20.000	49.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Op aanvraag
3204 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Op aanvraag
3204 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Op aanvraag
3204 14.001	40.00 mm	48.00 mm	92.00 mm	16.00 mm	14.00 mm	Op aanvraag
3204 18.000	42.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Op aanvraag
3204 16.000	41.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Op aanvraag
3204 8.000	25.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Op aanvraag
3204 14.000	34.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Op aanvraag
3204 12.000	33.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Op aanvraag
3204 25.000	58.00 mm	56.00 mm	121.00 mm	25.00 mm	25.00 mm	Op aanvraag