Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4031093389280, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: short, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Feed direction: with drilling

Technische specificaties

EAN: 4031093389280
Type: N
Designation: Standard Ratio end mill RF 100 U
Helix angle: 35/38
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Product family: RF 100 U
Back rake angle: 4
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
Length picto milling: short
Type of machine interface: HB
Number of cutting edges range (from/to): 4

Afmetingen en bestelcodes

Bestelcode	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Beschikbaarheid
3731 10.000	20.70 mm	40.00 mm	66.00 mm	10.00 mm	10.00 mm	Op aanvraag
3731 8.000	17.36 mm	36.00 mm	58.00 mm	8.00 mm	8.00 mm	Op aanvraag
3731 3.000	7.10 mm	36.00 mm	50.00 mm	6.00 mm	3.00 mm	Op aanvraag
3731 5.000	12.50 mm	36.00 mm	54.00 mm	6.00 mm	5.00 mm	Op aanvraag
3731 12.000	24.04 mm	45.00 mm	73.00 mm	12.00 mm	12.00 mm	Op aanvraag
3731 6.000	14.20 mm	36.00 mm	54.00 mm	6.00 mm	6.00 mm	Op aanvraag
3731 18.000	35.70 mm	48.00 mm	84.00 mm	18.00 mm	18.00 mm	Op aanvraag
3731 14.000	27.38 mm	45.00 mm	75.00 mm	14.00 mm	14.00 mm	Op aanvraag
3731 20.000	39.00 mm	50.00 mm	92.00 mm	20.00 mm	20.00 mm	Op aanvraag
3731 4.000	10.80 mm	36.00 mm	54.00 mm	6.00 mm	4.00 mm	Op aanvraag
3731 16.000	32.40 mm	48.00 mm	82.00 mm	16.00 mm	16.00 mm	Op aanvraag