← Katalog
Håll muspekaren över bilden för att zooma
6800
Ratio end mill RF 100 Diver (3-fluted)
Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 6.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844234819, Cutting material: Solid carbide, Surface: Signum, Type: N, Helix angle: 41/43/45, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 3, Type of machine interface: HB, Feed direction: with drilling
Tekniska specifikationer
- EAN
- 4049844234819
- Type
- N
- Surface
- Signum
- Designation
- Ratio end mill RF 100 Diver (3-fluted)
- Helix angle
- 41/43/45
- Diameter range
- 6.000 mm – 16.000 mm
- Feed direction
- with drilling
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 3
Dimensioner och beställningskoder
| Beställningskod | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Tillgänglighet | Begär pris |
|---|---|---|---|---|---|---|---|
| 6800 8.000 | 26.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | På förfrågan | |
| 6800 16.000 | 43.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | På förfrågan | |
| 6800 10.000 | 30.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | På förfrågan | |
| 6800 6.000 | 19.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | På förfrågan | |
| 6800 12.000 | 35.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | På förfrågan |