← Katalog
Pređite mišem preko slike za uvećanje
25510
Cutting insert for boring out and profiling
Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}], EAN: 4049844236400, Cutting material: Solid carbide, Surface: nanoA
Tehničke specifikacije
- EAN
- 4049844236400
- Surface
- nanoA
- Designation
- Cutting insert for boring out and profiling
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}]
Dimenzije i narudžbeni kodovi
| Narudžbeni kod | Total length | Shank diameter | Dostupnost | Zatražite cijenu |
|---|---|---|---|---|
| 25510 6.140 | 52.00 mm | 6.00 mm | Na upit | |
| 25510 6.070 | 67.00 mm | 6.00 mm | Na upit | |
| 25510 6.210 | 37.00 mm | 6.00 mm | Na upit | |
| 25510 6.430 | 47.00 mm | 6.00 mm | Na upit | |
| 25510 6.110 | 37.00 mm | 6.00 mm | Na upit | |
| 25510 6.310 | 37.00 mm | 6.00 mm | Na upit | |
| 25510 6.240 | 52.00 mm | 6.00 mm | Na upit | |
| 25510 6.060 | 62.00 mm | 6.00 mm | Na upit | |
| 25510 6.010 | 37.00 mm | 6.00 mm | Na upit | |
| 25510 6.150 | 57.00 mm | 6.00 mm | Na upit | |
| 25510 6.030 | 47.00 mm | 6.00 mm | Na upit | |
| 25510 6.470 | 67.00 mm | 6.00 mm | Na upit | |
| 25510 6.260 | 62.00 mm | 6.00 mm | Na upit | |
| 25510 6.340 | 52.00 mm | 6.00 mm | Na upit | |
| 25510 6.050 | 57.00 mm | 6.00 mm | Na upit | |
| 25510 6.370 | 67.00 mm | 6.00 mm | Na upit | |
| 25510 6.440 | 52.00 mm | 6.00 mm | Na upit | |
| 25510 6.230 | 47.00 mm | 6.00 mm | Na upit | |
| 25510 6.320 | 42.00 mm | 6.00 mm | Na upit | |
| 25510 6.120 | 42.00 mm | 6.00 mm | Na upit | |
| 25510 6.410 | 37.00 mm | 6.00 mm | Na upit | |
| 25510 6.360 | 62.00 mm | 6.00 mm | Na upit | |
| 25510 6.130 | 47.00 mm | 6.00 mm | Na upit | |
| 25510 6.420 | 42.00 mm | 6.00 mm | Na upit | |
| 25510 6.330 | 47.00 mm | 6.00 mm | Na upit | |
| 25510 6.020 | 42.00 mm | 6.00 mm | Na upit | |
| 25510 6.040 | 52.00 mm | 6.00 mm | Na upit | |
| 25510 6.460 | 62.00 mm | 6.00 mm | Na upit | |
| 25510 6.220 | 42.00 mm | 6.00 mm | Na upit | |
| 25510 6.270 | 67.00 mm | 6.00 mm | Na upit | |
| 25510 6.250 | 57.00 mm | 6.00 mm | Na upit | |
| 25510 6.450 | 57.00 mm | 6.00 mm | Na upit | |
| 25510 6.160 | 62.00 mm | 6.00 mm | Na upit | |
| 25510 6.170 | 67.00 mm | 6.00 mm | Na upit | |
| 25510 6.350 | 57.00 mm | 6.00 mm | Na upit |