← Katalog
Pređite mišem preko slike za uvećanje
25710
Cutting insert for boring out and profiling
Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}], EAN: 4049844242500, Cutting material: Solid carbide, Surface: nanoA
Tehničke specifikacije
- EAN
- 4049844242500
- Surface
- nanoA
- Designation
- Cutting insert for boring out and profiling
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}]
Dimenzije i narudžbeni kodovi
| Narudžbeni kod | Total length | Shank diameter | Dostupnost | Zatražite cijenu |
|---|---|---|---|---|
| 25710 6.037 | 37.00 mm | 6.00 mm | Na upit | |
| 25710 6.032 | 57.00 mm | 6.00 mm | Na upit | |
| 25710 6.003 | 62.00 mm | 6.00 mm | Na upit | |
| 25710 6.030 | 47.00 mm | 6.00 mm | Na upit | |
| 25710 6.020 | 42.00 mm | 6.00 mm | Na upit | |
| 25710 6.038 | 42.00 mm | 6.00 mm | Na upit | |
| 25710 6.012 | 77.00 mm | 6.00 mm | Na upit | |
| 25710 6.019 | 37.00 mm | 6.00 mm | Na upit | |
| 25710 6.024 | 62.00 mm | 6.00 mm | Na upit | |
| 25710 6.025 | 67.00 mm | 6.00 mm | Na upit | |
| 25710 6.028 | 37.00 mm | 6.00 mm | Na upit | |
| 25710 6.001 | 52.00 mm | 6.00 mm | Na upit | |
| 25710 6.017 | 42.00 mm | 6.00 mm | Na upit | |
| 25710 6.042 | 62.00 mm | 6.00 mm | Na upit | |
| 25710 6.036 | 77.00 mm | 6.00 mm | Na upit | |
| 25710 6.009 | 62.00 mm | 6.00 mm | Na upit | |
| 25710 6.035 | 72.00 mm | 6.00 mm | Na upit | |
| 25710 6.040 | 52.00 mm | 6.00 mm | Na upit | |
| 25710 6.045 | 77.00 mm | 6.00 mm | Na upit | |
| 25710 6.011 | 72.00 mm | 6.00 mm | Na upit | |
| 25710 6.010 | 67.00 mm | 6.00 mm | Na upit | |
| 25710 6.002 | 57.00 mm | 6.00 mm | Na upit | |
| 25710 6.044 | 72.00 mm | 6.00 mm | Na upit | |
| 25710 6.013 | 37.00 mm | 6.00 mm | Na upit | |
| 25710 6.022 | 52.00 mm | 6.00 mm | Na upit | |
| 25710 6.034 | 67.00 mm | 6.00 mm | Na upit | |
| 25710 6.023 | 57.00 mm | 6.00 mm | Na upit | |
| 25710 6.006 | 77.00 mm | 6.00 mm | Na upit | |
| 25710 6.033 | 62.00 mm | 6.00 mm | Na upit | |
| 25710 6.018 | 47.00 mm | 6.00 mm | Na upit | |
| 25710 6.041 | 57.00 mm | 6.00 mm | Na upit | |
| 25710 6.029 | 42.00 mm | 6.00 mm | Na upit | |
| 25710 6.021 | 47.00 mm | 6.00 mm | Na upit | |
| 25710 6.026 | 72.00 mm | 6.00 mm | Na upit | |
| 25710 6.005 | 72.00 mm | 6.00 mm | Na upit | |
| 25710 6.027 | 77.00 mm | 6.00 mm | Na upit | |
| 25710 6.016 | 37.00 mm | 6.00 mm | Na upit | |
| 25710 6.031 | 52.00 mm | 6.00 mm | Na upit | |
| 25710 6.008 | 57.00 mm | 6.00 mm | Na upit | |
| 25710 6.007 | 52.00 mm | 6.00 mm | Na upit | |
| 25710 6.043 | 67.00 mm | 6.00 mm | Na upit | |
| 25710 6.014 | 42.00 mm | 6.00 mm | Na upit | |
| 25710 6.004 | 67.00 mm | 6.00 mm | Na upit | |
| 25710 6.015 | 47.00 mm | 6.00 mm | Na upit | |
| 25710 6.039 | 47.00 mm | 6.00 mm | Na upit |