← Katalog
Pređite mišem preko slike za uvećanje
25126
Cutting insert for internal grooving, straight slots
Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}], EAN: 4049844219618, Cutting material: Solid carbide, Surface: nanoA
Tehničke specifikacije
- EAN
- 4049844219618
- Surface
- nanoA
- Designation
- Cutting insert for internal grooving, straight slots
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}]
Dimenzije i narudžbeni kodovi
| Narudžbeni kod | Total length | Shank diameter | Dostupnost | Zatražite cijenu |
|---|---|---|---|---|
| 25126 4.025 | 35.00 mm | 4.00 mm | Na upit | |
| 25126 4.018 | 50.00 mm | 4.00 mm | Na upit | |
| 25126 4.004 | 25.00 mm | 4.00 mm | Na upit | |
| 25126 4.001 | 25.00 mm | 4.00 mm | Na upit | |
| 25126 4.002 | 25.00 mm | 4.00 mm | Na upit | |
| 25126 4.013 | 40.00 mm | 4.00 mm | Na upit | |
| 25126 4.015 | 35.00 mm | 4.00 mm | Na upit | |
| 25126 4.014 | 30.00 mm | 4.00 mm | Na upit | |
| 25126 4.012 | 35.00 mm | 4.00 mm | Na upit | |
| 25126 4.024 | 30.00 mm | 4.00 mm | Na upit | |
| 25126 4.005 | 30.00 mm | 4.00 mm | Na upit | |
| 25126 4.009 | 35.00 mm | 4.00 mm | Na upit | |
| 25126 4.028 | 50.00 mm | 4.00 mm | Na upit | |
| 25126 4.023 | 50.00 mm | 4.00 mm | Na upit | |
| 25126 4.026 | 40.00 mm | 4.00 mm | Na upit | |
| 25126 4.022 | 45.00 mm | 4.00 mm | Na upit | |
| 25126 4.021 | 40.00 mm | 4.00 mm | Na upit | |
| 25126 4.003 | 25.00 mm | 4.00 mm | Na upit | |
| 25126 4.008 | 30.00 mm | 4.00 mm | Na upit | |
| 25126 4.011 | 30.00 mm | 4.00 mm | Na upit | |
| 25126 4.010 | 25.00 mm | 4.00 mm | Na upit | |
| 25126 4.006 | 25.00 mm | 4.00 mm | Na upit | |
| 25126 4.016 | 40.00 mm | 4.00 mm | Na upit | |
| 25126 4.017 | 45.00 mm | 4.00 mm | Na upit | |
| 25126 4.020 | 35.00 mm | 4.00 mm | Na upit | |
| 25126 4.007 | 25.00 mm | 4.00 mm | Na upit | |
| 25126 4.027 | 45.00 mm | 4.00 mm | Na upit | |
| 25126 4.019 | — | — | Na upit |