← Katalog
Pređite mišem preko slike za uvećanje
3429
Ratio end mill RF 40
Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 8.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093379014, Surface: bright, Type: N, Helix angle: 35/38, Back rake angle: 11, Length picto milling: long, Number of cutting edges range (from/to): 4-6, Type of machine interface: B, Corner design: Schneidecke 90°, Feed direction: with drilling
Tehničke specifikacije
- EAN
- 4031093379014
- Type
- N
- Surface
- bright
- Designation
- Ratio end mill RF 40
- Helix angle
- 35/38
- Corner design
- Schneidecke 90°
- Diameter range
- 8.000 mm – 30.000 mm
- Feed direction
- with drilling
- Back rake angle
- 11
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- B
- Number of cutting edges range (from/to)
- 4-6
Dimenzije i narudžbeni kodovi
| Narudžbeni kod | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostupnost | Zatražite cijenu |
|---|---|---|---|---|---|---|---|
| 3429 12.000 | 31.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Na upit | |
| 3429 16.000 | 37.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Na upit | |
| 3429 8.000 | 23.00 mm | 40.00 mm | 69.00 mm | 10.00 mm | 8.00 mm | Na upit | |
| 3429 10.000 | 26.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Na upit | |
| 3429 14.000 | 31.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 14.00 mm | Na upit | |
| 3429 18.000 | 37.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 18.00 mm | Na upit | |
| 3429 20.000 | 45.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Na upit | |
| 3429 25.000 | 54.00 mm | 56.00 mm | 121.00 mm | 25.00 mm | 25.00 mm | Na upit |