← Catalogus
Beweeg over de afbeelding om in te zoomen
3117
Morse taper end mill
Morse taper end mill. Designation: Morse taper end mill, Diameter range: 10.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093368124, Cutting material: HSCO, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 11, Length picto milling: long, Number of cutting edges range (from/to): 4-8, Type of machine interface: MK, Corner design: Schneidecke 90°, Feed direction: lateral
Technische specificaties
- EAN
- 4031093368124
- Type
- N
- Surface
- bright
- Designation
- Morse taper end mill
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 10.000 mm – 50.000 mm
- Feed direction
- lateral
- Back rake angle
- 11
- Cutting material
- HSCO
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- MK
- Number of cutting edges range (from/to)
- 4-8
Afmetingen en bestelcodes
| Bestelcode | Flute length | Total length | Nominal diameter | Beschikbaarheid | Prijs aanvragen |
|---|---|---|---|---|---|
| 3117 45.000 | 83.00 mm | 211.00 mm | 45.00 mm | Op aanvraag | |
| 3117 14.000 | 34.00 mm | 111.00 mm | 14.00 mm | Op aanvraag | |
| 3117 20.000 | 46.00 mm | 123.00 mm | 20.00 mm | Op aanvraag | |
| 3117 16.000 | 40.00 mm | 117.00 mm | 16.00 mm | Op aanvraag | |
| 3117 32.000 | 73.00 mm | 201.00 mm | 32.00 mm | Op aanvraag | |
| 3117 24.000 | 53.00 mm | 147.00 mm | 24.00 mm | Op aanvraag | |
| 3117 26.000 | 53.00 mm | 147.00 mm | 26.00 mm | Op aanvraag | |
| 3117 28.000 | 53.00 mm | 147.00 mm | 28.00 mm | Op aanvraag | |
| 3117 10.000 | 29.00 mm | 92.00 mm | 10.00 mm | Op aanvraag | |
| 3117 12.000 | 33.00 mm | 96.00 mm | 12.00 mm | Op aanvraag | |
| 3117 50.000 | 100.00 mm | 261.00 mm | 50.00 mm | Op aanvraag | |
| 3117 40.000 | 83.00 mm | 211.00 mm | 40.00 mm | Op aanvraag | |
| 3117 30.000 | 53.00 mm | 147.00 mm | 30.00 mm | Op aanvraag | |
| 3117 25.000 | 53.00 mm | 147.00 mm | 25.00 mm | Op aanvraag |