End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844195516, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: extra long, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Corner design: Schneidecke 90°

Spécifications techniques

EAN: 4049844195516
Type: N
Designation: End mill XL (4-fluted)
Helix angle: 30
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: extra long
Type of machine interface: HB
Number of cutting edges range (from/to): 4

Dimensions et références de commande

Code commande	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilité
19977 10.000	55.00 mm	40.00 mm	95.00 mm	10.00 mm	10.00 mm	Sur demande
19977 6.000	30.00 mm	36.00 mm	68.00 mm	6.00 mm	6.00 mm	Sur demande
19977 16.000	77.72 mm	48.00 mm	125.00 mm	16.00 mm	16.00 mm	Sur demande
19977 14.000	65.88 mm	45.00 mm	110.00 mm	14.00 mm	14.00 mm	Sur demande
19977 3.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Sur demande
19977 8.000	46.00 mm	36.00 mm	88.00 mm	8.00 mm	8.00 mm	Sur demande
19977 18.000	79.56 mm	48.00 mm	125.00 mm	18.00 mm	18.00 mm	Sur demande
19977 20.000	93.40 mm	50.00 mm	141.00 mm	20.00 mm	20.00 mm	Sur demande
19977 5.000	29.00 mm	36.00 mm	68.00 mm	6.00 mm	5.00 mm	Sur demande
19977 12.000	64.04 mm	45.00 mm	110.00 mm	12.00 mm	12.00 mm	Sur demande
19977 4.000	23.00 mm	36.00 mm	63.00 mm	6.00 mm	4.00 mm	Sur demande