Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093779210, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Corner design: Schneidecke 90°, Feed direction: with drilling

Технически спецификации

EAN: 4031093779210
Type: N
Designation: Ball nose end mill (4-fluted)
Helix angle: 30
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HB
Number of cutting edges range (from/to): 4

Размери и кодове за поръчка

Код за поръчка	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Наличност
5584 12.000	37.04 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	По запитване
5584 6.000	19.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	По запитване
5584 8.000	27.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	По запитване
5584 10.000	32.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	По запитване
5584 3.000	11.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	По запитване
5584 16.000	46.72 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	По запитване
5584 4.000	15.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	По запитване
5584 5.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	По запитване
5584 20.000	56.40 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	По запитване