Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 0.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093779807, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling

Ingingo z'ubuhinga

EAN: 4031093779807
Type: N
Designation: Ball nose slot drill (2-fluted)
Helix angle: 30
Diameter range: 0.500 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 2

Ingero n'amakode yo gutumiza

Icode yo gutumiza	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Ukuboneka
5585 3.000	11.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Kubisabwe
5585 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Kubisabwe
5585 0.500	1.70 mm	28.00 mm	38.00 mm	3.00 mm	0.50 mm	Kubisabwe
5585 1.000	3.25 mm	28.00 mm	38.00 mm	3.00 mm	1.00 mm	Kubisabwe
5585 1.500	5.50 mm	28.00 mm	38.00 mm	3.00 mm	1.50 mm	Kubisabwe
5585 20.000	51.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Kubisabwe
5585 5.000	15.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Kubisabwe
5585 12.000	35.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Kubisabwe
5585 2.000	8.50 mm	36.00 mm	57.00 mm	6.00 mm	2.00 mm	Kubisabwe
5585 10.000	29.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Kubisabwe
5585 4.000	12.50 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Kubisabwe
5585 6.000	17.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Kubisabwe