← Igitabo c'ibicuruzwa
Shira imbeba ku mashusho kugira uyagure
6866
Ratio roughing end mill RF 100 AL
Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844301665, Cutting material: Solid carbide, Surface: Carbo, Product family: RF 100 A, Helix angle: 30/29/31, Back rake angle: 12, Length picto milling: 5xD, Number of cutting edges range (from/to): 3, Type of machine interface: HA
Ingingo z'ubuhinga
- EAN
- 4049844301665
- Surface
- Carbo
- Designation
- Ratio roughing end mill RF 100 AL
- Helix angle
- 30/29/31
- Diameter range
- 10.000 mm – 25.000 mm
- Product family
- RF 100 A
- Back rake angle
- 12
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- 5xD
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 3
Ingero n'amakode yo gutumiza
| Icode yo gutumiza | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Ukuboneka | Saba igiciro |
|---|---|---|---|---|---|---|---|
| 6866 16.000 | 48.00 mm | 48.00 mm | 132.00 mm | 16.00 mm | 16.00 mm | Kubisabwe | |
| 6866 10.000 | 32.00 mm | 40.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | Kubisabwe | |
| 6866 12.000 | 39.00 mm | 45.00 mm | 108.00 mm | 12.00 mm | 12.00 mm | Kubisabwe | |
| 6866 20.000 | 57.00 mm | 50.00 mm | 154.00 mm | 20.00 mm | 20.00 mm | Kubisabwe | |
| 6866 25.000 | 66.00 mm | 56.00 mm | 185.00 mm | 25.00 mm | 25.00 mm | Kubisabwe |