← Igitabo c'ibicuruzwa
Shira imbeba ku mashusho kugira uyagure
6891
Standard Ratio end mill RF 100 U
Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844283916, Cutting material: Solid carbide, Type: H, Helix angle: 30/32, Back rake angle: 4, Length picto milling: short, Number of cutting edges range (from/to): 4, Type of machine interface: ~HB, Feed direction: with drilling
Ingingo z'ubuhinga
- EAN
- 4049844283916
- Type
- H
- Designation
- Standard Ratio end mill RF 100 U
- Helix angle
- 30/32
- Diameter range
- 6.350 mm – 25.400 mm
- Feed direction
- with drilling
- Back rake angle
- 4
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- short
- Type of machine interface
- ~HB
- Number of cutting edges range (from/to)
- 4
Ingero n'amakode yo gutumiza
| Icode yo gutumiza | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Ukuboneka | Saba igiciro |
|---|---|---|---|---|---|---|---|
| 6891 19.050 | 50.00 mm | 51.60 mm | 101.60 mm | 19.05 mm | 19.05 mm | Kubisabwe | |
| 6891 15.870 | 42.00 mm | 48.40 mm | 88.90 mm | 15.88 mm | 15.88 mm | Kubisabwe | |
| 6891 7.940 | 25.50 mm | 38.00 mm | 63.50 mm | 7.94 mm | 7.94 mm | Kubisabwe | |
| 6891 12.700 | 41.00 mm | 45.20 mm | 88.90 mm | 12.70 mm | 12.70 mm | Kubisabwe | |
| 6891 9.520 | 31.50 mm | 32.00 mm | 63.50 mm | 9.53 mm | 9.53 mm | Kubisabwe | |
| 6891 6.350 | 24.00 mm | 39.50 mm | 63.50 mm | 6.35 mm | 6.35 mm | Kubisabwe | |
| 6891 25.400 | 54.00 mm | 58.00 mm | 101.60 mm | 25.40 mm | 25.40 mm | Kubisabwe |