Ball nose hard profile cutter GF 300 B

Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4049844152717, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 30, Back rake angle: -7, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HA/HA, Feed direction: with drilling

Spesifikasi teknikal

EAN: 4049844152717
Type: H
Surface: Signum
Designation: Ball nose hard profile cutter GF 300 B
Helix angle: 30
Diameter range: 2.000 mm – 12.000 mm
Feed direction: with drilling
Back rake angle: -7
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
Length picto milling: long
Type of machine interface: ~HA/HA
Number of cutting edges range (from/to): 4

Dimensi dan kod pesanan

Kod pesanan	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Ketersediaan
4246 8.000	15.16 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Atas permintaan
4246 6.000	12.12 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Atas permintaan
4246 4.000	8.20 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Atas permintaan
4246 12.000	22.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Atas permintaan
4246 5.000	10.25 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Atas permintaan
4246 10.000	18.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Atas permintaan
4246 3.000	6.65 mm	36.10 mm	57.00 mm	6.00 mm	3.00 mm	Atas permintaan
4246 2.000	5.10 mm	35.90 mm	57.00 mm	6.00 mm	2.00 mm	Atas permintaan