Ball nose hard profile cutter GF 300 B

Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093675376, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 30, Back rake angle: -7, Length picto milling: extra long, Number of cutting edges range (from/to): 2, Type of machine interface: ~HA/HA, Feed direction: with drilling

Especificações técnicas

EAN: 4031093675376
Type: H
Surface: Signum
Designation: Ball nose hard profile cutter GF 300 B
Helix angle: 30
Diameter range: 3.000 mm – 16.000 mm
Feed direction: with drilling
Back rake angle: -7
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
Length picto milling: extra long
Type of machine interface: ~HA/HA
Number of cutting edges range (from/to): 2

Dimensões e códigos de encomenda

Código de encomenda	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilidade
3360 5.000	14.00 mm	36.00 mm	75.00 mm	6.00 mm	5.00 mm	Sob consulta
3360 10.000	27.00 mm	40.00 mm	100.00 mm	10.00 mm	10.00 mm	Sob consulta
3360 6.000	16.20 mm	36.00 mm	75.00 mm	6.00 mm	6.00 mm	Sob consulta
3360 12.000	32.40 mm	45.00 mm	150.00 mm	12.00 mm	12.00 mm	Sob consulta
3360 8.000	21.60 mm	36.00 mm	100.00 mm	8.00 mm	8.00 mm	Sob consulta
3360 16.000	43.20 mm	48.00 mm	150.00 mm	16.00 mm	16.00 mm	Sob consulta
3360 4.000	10.80 mm	36.00 mm	75.00 mm	6.00 mm	4.00 mm	Sob consulta
3360 3.000	9.20 mm	36.90 mm	75.00 mm	6.00 mm	3.00 mm	Sob consulta