← ཐོ་དེབ།
རྒྱ་ཆེ་བཟོ་ནིའི་དོན་ལུ་ པར་གྱི་གུར་མཛུབ་རྟགས་བཞག
6873
Ratio end mill RF 100 Diver
Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844287174, Cutting material: Solid carbide, Surface: Signum, Type: N, Helix angle: 41/43/45, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 3, Type of machine interface: ~HB, Feed direction: with drilling
འཕྲུལ་རིག་གསལ་བཤད།
- EAN
- 4049844287174
- Type
- N
- Surface
- Signum
- Designation
- Ratio end mill RF 100 Diver
- Helix angle
- 41/43/45
- Diameter range
- 6.350 mm – 19.050 mm
- Feed direction
- with drilling
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- ~HB
- Number of cutting edges range (from/to)
- 3
ཚད་གཞི་དང་ མངགས་ཉོའི་ཨང་རྟགས།
| མངགས་ཉོའི་ཨང་རྟགས། | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | འཐོབ་ཚུལ། | གོང་ཚད་ཞུ་བསྐུར། |
|---|---|---|---|---|---|---|---|
| 6873 19.050 | 39.50 mm | 51.60 mm | 101.60 mm | 19.05 mm | 19.05 mm | ཞུ་བ་ལྟར་དུ། | |
| 6873 15.870 | 30.00 mm | 48.40 mm | 88.90 mm | 15.88 mm | 15.88 mm | ཞུ་བ་ལྟར་དུ། | |
| 6873 9.520 | 24.00 mm | 41.00 mm | 63.50 mm | 9.53 mm | 9.53 mm | ཞུ་བ་ལྟར་དུ། | |
| 6873 12.700 | 26.00 mm | 45.20 mm | 76.20 mm | 12.70 mm | 12.70 mm | ཞུ་བ་ལྟར་དུ། | |
| 6873 7.940 | 19.50 mm | 41.00 mm | 63.50 mm | 7.94 mm | 7.94 mm | ཞུ་བ་ལྟར་དུ། | |
| 6873 6.350 | 19.50 mm | 41.00 mm | 63.50 mm | 6.35 mm | 6.35 mm | ཞུ་བ་ལྟར་དུ། |