Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 0.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093779807, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling

Тэхнічныя характарыстыкі

EAN: 4031093779807
Type: N
Designation: Ball nose slot drill (2-fluted)
Helix angle: 30
Diameter range: 0.500 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 2

Памеры і коды для заказу

Код для заказу	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Наяўнасць
5585 3.000	11.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Па запыце
5585 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Па запыце
5585 0.500	1.70 mm	28.00 mm	38.00 mm	3.00 mm	0.50 mm	Па запыце
5585 1.000	3.25 mm	28.00 mm	38.00 mm	3.00 mm	1.00 mm	Па запыце
5585 1.500	5.50 mm	28.00 mm	38.00 mm	3.00 mm	1.50 mm	Па запыце
5585 20.000	51.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Па запыце
5585 5.000	15.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Па запыце
5585 12.000	35.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Па запыце
5585 2.000	8.50 mm	36.00 mm	57.00 mm	6.00 mm	2.00 mm	Па запыце
5585 10.000	29.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Па запыце
5585 4.000	12.50 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Па запыце
5585 6.000	17.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Па запыце