← Каталог
Навядзіце курсор на выяву для павелічэння
3361
Hard profile cutter with Torus grind GF 300 T
Hard profile cutter with Torus grind GF 300 T. Designation: Hard profile cutter with Torus grind GF 300 T, Diameter range: 0.500 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4049844153257, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 30, Back rake angle: 8, Length picto milling: long, Number of cutting edges range (from/to): 2-4, Type of machine interface: ~HA/HA
Тэхнічныя характарыстыкі
- EAN
- 4049844153257
- Type
- H
- Surface
- Signum
- Designation
- Hard profile cutter with Torus grind GF 300 T
- Helix angle
- 30
- Diameter range
- 0.500 mm – 16.000 mm
- Back rake angle
- 8
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- long
- Type of machine interface
- ~HA/HA
- Number of cutting edges range (from/to)
- 2-4
Памеры і коды для заказу
| Код для заказу | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Наяўнасць | Запытаць цану |
|---|---|---|---|---|---|---|---|
| 3361 12.005 | 30.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Па запыце | |
| 3361 6.005 | 15.12 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Па запыце | |
| 3361 8.015 | 20.16 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Па запыце | |
| 3361 4.000 | 10.20 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | Па запыце | |
| 3361 12.000 | 30.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Па запыце | |
| 3361 16.000 | 39.52 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Па запыце | |
| 3361 4.003 | 10.20 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | Па запыце | |
| 3361 5.003 | 13.25 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Па запыце | |
| 3361 8.005 | 20.16 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Па запыце | |
| 3361 8.020 | 20.16 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Па запыце | |
| 3361 6.000 | 15.12 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Па запыце | |
| 3361 10.020 | 25.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Па запыце | |
| 3361 5.000 | 13.25 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Па запыце | |
| 3361 12.020 | 30.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Па запыце | |
| 3361 6.003 | 15.12 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Па запыце | |
| 3361 10.010 | 25.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Па запыце | |
| 3361 6.015 | 15.12 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Па запыце | |
| 3361 10.000 | 25.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Па запыце | |
| 3361 10.005 | 25.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Па запыце | |
| 3361 16.030 | 39.52 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Па запыце | |
| 3361 12.010 | 30.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Па запыце | |
| 3361 8.000 | 20.16 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Па запыце | |
| 3361 3.003 | 8.15 mm | 36.10 mm | 57.00 mm | 6.00 mm | 3.00 mm | Па запыце | |
| 3361 3.000 | 8.15 mm | 36.10 mm | 57.00 mm | 6.00 mm | 3.00 mm | Па запыце | |
| 3361 2.002 | 6.00 mm | 35.80 mm | 57.00 mm | 6.00 mm | 2.00 mm | Па запыце | |
| 3361 1.002 | 3.50 mm | 27.90 mm | 50.00 mm | 4.00 mm | 1.00 mm | Па запыце | |
| 3361 0.501 | 1.75 mm | 27.80 mm | 50.00 mm | 4.00 mm | 0.50 mm | Па запыце | |
| 3361 2.005 | 6.00 mm | 35.80 mm | 57.00 mm | 6.00 mm | 2.00 mm | Па запыце |