← Каталог
Навядзіце курсор на выяву для павелічэння
3440
Morse taper end mill
Morse taper end mill. Designation: Morse taper end mill, Diameter range: 13.000 mm – 45.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093379526, Cutting material: HSCO, Surface: bright, Type: N, Helix angle: 35, Back rake angle: 11, Length picto milling: long, Number of cutting edges range (from/to): 4-6, Type of machine interface: MK, Corner design: Schneidecke 90°, Feed direction: lateral
Тэхнічныя характарыстыкі
- EAN
- 4031093379526
- Type
- N
- Surface
- bright
- Designation
- Morse taper end mill
- Helix angle
- 35
- Corner design
- Schneidecke 90°
- Diameter range
- 13.000 mm – 45.000 mm
- Feed direction
- lateral
- Back rake angle
- 11
- Cutting material
- HSCO
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- MK
- Number of cutting edges range (from/to)
- 4-6
Памеры і коды для заказу
| Код для заказу | Flute length | Total length | Nominal diameter | Наяўнасць | Запытаць цану |
|---|---|---|---|---|---|
| 3440 26.000 | 53.00 mm | 147.00 mm | 26.00 mm | Па запыце | |
| 3440 30.000 | 53.00 mm | 147.00 mm | 30.00 mm | Па запыце | |
| 3440 28.000 | 53.00 mm | 147.00 mm | 28.00 mm | Па запыце | |
| 3440 45.000 | 71.00 mm | 188.00 mm | 45.00 mm | Па запыце | |
| 3440 20.000 | 46.00 mm | 123.00 mm | 20.00 mm | Па запыце | |
| 3440 14.000 | 34.00 mm | 111.00 mm | 14.00 mm | Па запыце | |
| 3440 18.000 | 40.00 mm | 117.00 mm | 18.00 mm | Па запыце | |
| 3440 22.000 | 46.00 mm | 123.00 mm | 22.00 mm | Па запыце | |
| 3440 36.000 | 61.00 mm | 178.00 mm | 36.00 mm | Па запыце | |
| 3440 32.000 | 61.00 mm | 178.00 mm | 32.00 mm | Па запыце | |
| 3440 40.000 | 71.00 mm | 188.00 mm | 40.00 mm | Па запыце | |
| 3440 16.000 | 40.00 mm | 117.00 mm | 16.00 mm | Па запыце | |
| 3440 25.000 | 53.00 mm | 147.00 mm | 25.00 mm | Па запыце |