Ratio roughing end mill RF 100 VA

Ratio roughing end mill RF 100 VA. Designation: Ratio roughing end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4049844268098, Cutting material: Solid carbide, Surface: nanoA, Product family: RF 100 VA, Type: N, Helix angle: 36/38, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Corner design: Eckenfase 45°, Feed direction: with drilling

Тэхнічныя характарыстыкі

EAN: 4049844268098
Type: N
Surface: nanoA
Designation: Ratio roughing end mill RF 100 VA
Helix angle: 36/38
Corner design: Eckenfase 45°
Diameter range: 5.000 mm – 25.000 mm
Feed direction: with drilling
Product family: RF 100 VA
Back rake angle: 7
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HB
Number of cutting edges range (from/to): 4

Памеры і коды для заказу

Код для заказу	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Наяўнасць
6878 12.000	34.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Па запыце
6878 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Па запыце
6878 9.000	25.00 mm	40.00 mm	72.00 mm	10.00 mm	9.00 mm	Па запыце
6878 14.000	35.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Па запыце
6878 7.000	21.00 mm	36.00 mm	63.00 mm	8.00 mm	7.00 mm	Па запыце
6878 18.000	43.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Па запыце
6878 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Па запыце
6878 20.000	50.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Па запыце
6878 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Па запыце
6878 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Па запыце
6878 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Па запыце
6878 25.000	60.00 mm	56.00 mm	121.00 mm	25.00 mm	25.00 mm	Па запыце