← Каталог
Навядзіце курсор на выяву для павелічэння
3452
Slot drill (2-fluted)
Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093682848, Cutting material: M42, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 11, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: B, Corner design: Schneidecke 90°, Feed direction: with drilling
Тэхнічныя характарыстыкі
- EAN
- 4031093682848
- Type
- N
- Surface
- bright
- Designation
- Slot drill (2-fluted)
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 3.000 mm – 20.000 mm
- Feed direction
- with drilling
- Back rake angle
- 11
- Cutting material
- M42
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- B
- Number of cutting edges range (from/to)
- 2
Памеры і коды для заказу
| Код для заказу | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Наяўнасць | Запытаць цану |
|---|---|---|---|---|---|---|---|
| 3452 13.000 | 31.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 13.00 mm | Па запыце | |
| 3452 14.000 | 31.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 14.00 mm | Па запыце | |
| 3452 15.000 | 31.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 15.00 mm | Па запыце | |
| 3452 12.000 | 31.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Па запыце | |
| 3452 20.000 | 45.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Па запыце | |
| 3452 8.000 | 23.00 mm | 40.00 mm | 69.00 mm | 10.00 mm | 8.00 mm | Па запыце | |
| 3452 3.000 | 11.00 mm | 36.00 mm | 52.00 mm | 6.00 mm | 3.00 mm | Па запыце | |
| 3452 18.000 | 37.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 18.00 mm | Па запыце | |
| 3452 11.000 | 27.00 mm | 45.00 mm | 79.00 mm | 12.00 mm | 11.00 mm | Па запыце | |
| 3452 4.000 | 14.00 mm | 36.00 mm | 55.00 mm | 6.00 mm | 4.00 mm | Па запыце | |
| 3452 10.000 | 26.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Па запыце | |
| 3452 4.500 | 14.00 mm | 36.00 mm | 55.00 mm | 6.00 mm | 4.50 mm | Па запыце | |
| 3452 3.500 | 13.00 mm | 36.00 mm | 54.00 mm | 6.00 mm | 3.50 mm | Па запыце | |
| 3452 5.000 | 16.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Па запыце | |
| 3452 5.500 | 16.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.50 mm | Па запыце | |
| 3452 7.000 | 20.00 mm | 40.00 mm | 66.00 mm | 10.00 mm | 7.00 mm | Па запыце | |
| 3452 6.000 | 16.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Па запыце | |
| 3452 16.000 | 37.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Па запыце |