Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093685337, Cutting material: Solid carbide, Surface: bright, Type: W, Helix angle: 45, Back rake angle: 25, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Corner design: Schneidecke 90°, Feed direction: with drilling

Тэхнічныя характарыстыкі

EAN: 4031093685337
Type: W
Surface: bright
Designation: Slot drill (2-fluted)
Helix angle: 45
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 25
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 2

Памеры і коды для заказу

Код для заказу	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Наяўнасць
5743 5.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Па запыце
5743 12.000	31.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Па запыце
5743 3.000	10.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Па запыце
5743 6.000	16.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Па запыце
5743 10.000	27.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Па запыце
5743 14.000	32.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Па запыце
5743 8.000	23.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Па запыце
5743 16.000	37.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Па запыце
5743 18.000	38.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Па запыце
5743 4.000	11.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Па запыце