Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.175 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4031093732420, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: long, Number of cutting edges range (from/to): 4, Feed direction: with drilling

Тэхнічныя характарыстыкі

EAN: 4031093732420
Type: N
Designation: Standard Ratio end mill RF 100 U
Helix angle: 35/38
Diameter range: 3.175 mm – 31.750 mm
Feed direction: with drilling
Product family: RF 100 U
Back rake angle: 4
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
Length picto milling: long
Number of cutting edges range (from/to): 4

Памеры і коды для заказу

Код для заказу	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Наяўнасць
3114 19.050	50.38 mm	51.22 mm	101.60 mm	19.05 mm	19.05 mm	Па запыце
3114 4.760	19.33 mm	31.47 mm	50.80 mm	4.76 mm	4.76 mm	Па запыце
3114 6.350	23.45 mm	40.05 mm	63.50 mm	6.35 mm	6.35 mm	Па запыце
3114 25.400	54.51 mm	47.09 mm	101.60 mm	25.40 mm	25.40 mm	Па запыце
3114 7.940	25.82 mm	37.68 mm	63.50 mm	7.94 mm	7.94 mm	Па запыце
3114 9.520	31.88 mm	31.62 mm	63.50 mm	9.53 mm	9.53 mm	Па запыце
3114 11.110	32.95 mm	36.90 mm	69.85 mm	11.11 mm	11.11 mm	Па запыце
3114 3.170	11.72 mm	39.08 mm	50.80 mm	3.17 mm	3.17 mm	Па запыце
3114 31.750	84.14 mm	68.26 mm	152.40 mm	31.75 mm	31.75 mm	Па запыце
3114 12.700	34.01 mm	42.19 mm	76.20 mm	12.70 mm	12.70 mm	Па запыце
3114 15.870	42.32 mm	46.58 mm	88.90 mm	15.88 mm	15.88 mm	Па запыце