Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093388979, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling

Technische Daten

EAN: 4031093388979
Type: N
Designation: Ball nose end mill (4-fluted)
Helix angle: 30
Diameter range: 4.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

Abmessungen und Bestellnummern

Bestellnummer	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Verfügbarkeit
3727 12.000	37.04 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Auf Anfrage
3727 18.001	54.56 mm	50.00 mm	104.00 mm	20.00 mm	18.00 mm	Auf Anfrage
3727 8.000	27.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Auf Anfrage
3727 16.000	46.72 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Auf Anfrage
3727 4.000	15.00 mm	28.00 mm	50.00 mm	4.00 mm	4.00 mm	Auf Anfrage
3727 6.000	19.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Auf Anfrage
3727 5.000	18.00 mm	28.00 mm	50.00 mm	5.00 mm	5.00 mm	Auf Anfrage
3727 14.000	38.88 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Auf Anfrage
3727 14.001	44.88 mm	48.00 mm	92.00 mm	16.00 mm	14.00 mm	Auf Anfrage
3727 20.000	56.40 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Auf Anfrage
3727 10.000	32.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Auf Anfrage
3727 18.000	48.56 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Auf Anfrage