Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 8.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093379014, Surface: bright, Type: N, Helix angle: 35/38, Back rake angle: 11, Length picto milling: long, Number of cutting edges range (from/to): 4-6, Type of machine interface: B, Corner design: Schneidecke 90°, Feed direction: with drilling

Technische Daten

EAN: 4031093379014
Type: N
Surface: bright
Designation: Ratio end mill RF 40
Helix angle: 35/38
Corner design: Schneidecke 90°
Diameter range: 8.000 mm – 30.000 mm
Feed direction: with drilling
Back rake angle: 11
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: B
Number of cutting edges range (from/to): 4-6

Abmessungen und Bestellnummern

Bestellnummer	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Verfügbarkeit
3429 12.000	31.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Auf Anfrage
3429 16.000	37.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Auf Anfrage
3429 8.000	23.00 mm	40.00 mm	69.00 mm	10.00 mm	8.00 mm	Auf Anfrage
3429 10.000	26.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Auf Anfrage
3429 14.000	31.00 mm	45.00 mm	83.00 mm	12.00 mm	14.00 mm	Auf Anfrage
3429 18.000	37.00 mm	48.00 mm	92.00 mm	16.00 mm	18.00 mm	Auf Anfrage
3429 20.000	45.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Auf Anfrage
3429 25.000	54.00 mm	56.00 mm	121.00 mm	25.00 mm	25.00 mm	Auf Anfrage