End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093641647, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: extra long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Corner design: Schneidecke 90°

Spécifications techniques

EAN: 4031093641647
Type: N
Designation: End mill XL (4-fluted)
Helix angle: 30
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: extra long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

Dimensions et références de commande

Code commande	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilité
5556 6.000	36.00 mm	36.00 mm	75.00 mm	6.00 mm	6.00 mm	Sur demande
5556 4.000	29.00 mm	28.00 mm	75.00 mm	4.00 mm	4.00 mm	Sur demande
5556 3.000	23.00 mm	28.00 mm	75.00 mm	3.00 mm	3.00 mm	Sur demande
5556 10.000	50.00 mm	40.00 mm	100.00 mm	10.00 mm	10.00 mm	Sur demande
5556 5.000	35.00 mm	28.00 mm	75.00 mm	5.00 mm	5.00 mm	Sur demande
5556 20.000	83.40 mm	50.00 mm	150.00 mm	20.00 mm	20.00 mm	Sur demande
5556 8.000	48.00 mm	36.00 mm	100.00 mm	8.00 mm	8.00 mm	Sur demande
5556 12.000	56.04 mm	45.00 mm	150.00 mm	12.00 mm	12.00 mm	Sur demande
5556 16.000	79.72 mm	48.00 mm	150.00 mm	16.00 mm	16.00 mm	Sur demande
5556 14.000	57.88 mm	45.00 mm	150.00 mm	14.00 mm	14.00 mm	Sur demande
5556 18.000	81.56 mm	48.00 mm	150.00 mm	18.00 mm	18.00 mm	Sur demande