HSC ball nose hard profile cutter GA 200 A

HSC ball nose hard profile cutter GA 200 A. Designation: HSC ball nose hard profile cutter GA 200 A, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844811270, Cutting material: Solid carbide, Surface: Carbo+, Type: W, Helix angle: 35, Back rake angle: 15, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling

Especificaciones técnicas

EAN: 4049844811270
Type: W
Surface: Carbo+
Designation: HSC ball nose hard profile cutter GA 200 A
Helix angle: 35
Diameter range: 3.000 mm – 16.000 mm
Feed direction: with drilling
Back rake angle: 15
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 2

Dimensiones y códigos de pedido

Código de pedido	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilidad
6917 16.000	32.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Bajo consulta
6917 4.000	9.50 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Bajo consulta
6917 8.000	17.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Bajo consulta
6917 6.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Bajo consulta
6917 10.000	21.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Bajo consulta
6917 5.000	11.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Bajo consulta
6917 12.000	25.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Bajo consulta
6917 3.000	8.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Bajo consulta