← Katalog
Přejetím kurzorem myši přes obrázek jej přiblížíte
3030
Ball nose slot drill XL (2-fluted)
Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4031093365703, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: extra long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling
Technické parametry
- EAN
- 4031093365703
- Type
- N
- Designation
- Ball nose slot drill XL (2-fluted)
- Helix angle
- 30
- Diameter range
- 3.000 mm – 12.000 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
- Length picto milling
- extra long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 2
Rozměry a objednací kódy
| Objednací kód | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostupnost | Poptat cenu |
|---|---|---|---|---|---|---|---|
| 3030 8.000 | 48.00 mm | 36.00 mm | 100.00 mm | 8.00 mm | 8.00 mm | Na dotaz | |
| 3030 5.000 | 35.50 mm | 28.00 mm | 75.00 mm | 5.00 mm | 5.00 mm | Na dotaz | |
| 3030 12.000 | 58.00 mm | 45.00 mm | 150.00 mm | 12.00 mm | 12.00 mm | Na dotaz | |
| 3030 4.000 | 29.50 mm | 28.00 mm | 75.00 mm | 4.00 mm | 4.00 mm | Na dotaz | |
| 3030 10.000 | 50.00 mm | 40.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | Na dotaz | |
| 3030 3.000 | 24.00 mm | 28.00 mm | 75.00 mm | 3.00 mm | 3.00 mm | Na dotaz | |
| 3030 6.000 | 37.00 mm | 36.00 mm | 75.00 mm | 6.00 mm | 6.00 mm | Na dotaz |