Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093681407, Cutting material: Solid carbide, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: short, Number of cutting edges range (from/to): 3, Type of machine interface: HA, Feed direction: with drilling

Technické parametry

EAN: 4031093681407
Type: N
Designation: Slot drill GH 100 U (3-fluted)
Helix angle: 45
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 7
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
Length picto milling: short
Type of machine interface: HA
Number of cutting edges range (from/to): 3

Rozměry a objednací kódy

Objednací kód	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Dostupnost
5505 3.000	7.00 mm	36.00 mm	50.00 mm	6.00 mm	3.00 mm	Na dotaz
5505 7.000	15.00 mm	36.00 mm	58.00 mm	8.00 mm	7.00 mm	Na dotaz
5505 6.000	13.00 mm	36.00 mm	54.00 mm	6.00 mm	6.00 mm	Na dotaz
5505 8.000	16.00 mm	36.00 mm	58.00 mm	8.00 mm	8.00 mm	Na dotaz
5505 12.000	21.00 mm	45.00 mm	73.00 mm	12.00 mm	12.00 mm	Na dotaz
5505 10.000	19.00 mm	40.00 mm	66.00 mm	10.00 mm	10.00 mm	Na dotaz
5505 4.000	8.00 mm	36.00 mm	54.00 mm	6.00 mm	4.00 mm	Na dotaz
5505 18.000	30.00 mm	48.00 mm	84.00 mm	18.00 mm	18.00 mm	Na dotaz
5505 5.000	10.00 mm	36.00 mm	54.00 mm	6.00 mm	5.00 mm	Na dotaz
5505 20.000	34.00 mm	50.00 mm	92.00 mm	20.00 mm	20.00 mm	Na dotaz
5505 9.000	18.00 mm	40.00 mm	66.00 mm	10.00 mm	9.00 mm	Na dotaz
5505 16.000	27.00 mm	48.00 mm	82.00 mm	16.00 mm	16.00 mm	Na dotaz
5505 14.000	24.00 mm	45.00 mm	75.00 mm	14.00 mm	14.00 mm	Na dotaz