Finishing end mill G-Mold 65 F

Finishing end mill G-Mold 65 F. Designation: Finishing end mill G-Mold 65 F, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4049844500884, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 42, Back rake angle: -3, Length picto milling: extra long, Number of cutting edges range (from/to): 6, Type of machine interface: ~HA/HA

Technische Daten

EAN: 4049844500884
Type: H
Surface: Signum
Designation: Finishing end mill G-Mold 65 F
Helix angle: 42
Diameter range: 3.000 mm – 20.000 mm
Back rake angle: -3
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
Length picto milling: extra long
Type of machine interface: ~HA/HA
Number of cutting edges range (from/to): 6

Abmessungen und Bestellnummern

Bestellnummer	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Verfügbarkeit
6946 20.000	71.00 mm	50.00 mm	150.00 mm	20.00 mm	20.00 mm	Auf Anfrage
6946 6.000	23.90 mm	36.00 mm	75.00 mm	6.00 mm	6.00 mm	Auf Anfrage
6946 10.000	35.50 mm	40.00 mm	100.00 mm	10.00 mm	10.00 mm	Auf Anfrage
6946 5.000	20.25 mm	36.00 mm	75.00 mm	6.00 mm	5.00 mm	Auf Anfrage
6946 12.000	41.40 mm	45.00 mm	114.00 mm	12.00 mm	12.00 mm	Auf Anfrage
6946 16.000	59.20 mm	48.00 mm	125.00 mm	16.00 mm	16.00 mm	Auf Anfrage
6946 8.000	31.60 mm	36.00 mm	90.00 mm	8.00 mm	8.00 mm	Auf Anfrage
6946 4.000	16.60 mm	36.00 mm	65.00 mm	6.00 mm	4.00 mm	Auf Anfrage
6946 14.000	48.30 mm	45.00 mm	100.00 mm	14.00 mm	14.00 mm	Auf Anfrage
6946 3.000	12.95 mm	39.70 mm	65.00 mm	6.00 mm	3.00 mm	Auf Anfrage