← Katalog
Hold musen over billedet for at zoome
5533
Ball nose slot drill (2-fluted)
Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 4.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093579544, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: HB, Feed direction: with drilling
Tekniske specifikationer
- EAN
- 4031093579544
- Type
- N
- Designation
- Ball nose slot drill (2-fluted)
- Helix angle
- 30
- Diameter range
- 4.000 mm – 12.000 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 2
Dimensioner og bestillingsnumre
| Bestillingsnummer | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Tilgængelighed | Forespørg pris |
|---|---|---|---|---|---|---|---|
| 5533 12.000 | 35.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | På forespørgsel | |
| 5533 8.000 | 24.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | På forespørgsel | |
| 5533 6.000 | 17.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | På forespørgsel | |
| 5533 4.000 | 12.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | På forespørgsel | |
| 5533 5.000 | 15.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | På forespørgsel | |
| 5533 10.000 | 29.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | På forespørgsel |