End mill CR 200 for fibre-reinforced plastics

End mill CR 200 for fibre-reinforced plastics. Designation: End mill CR 200 for fibre-reinforced plastics, Diameter range: 4.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4069941013230, Indicator new/addition: New, Cutting material: Solid carbide, Surface: bright, Product family: CR 200, Helix angle: 5, Back rake angle: 10, Length picto milling: long, Number of cutting edges range (from/to): 6-8, Feed direction: with drilling

Tekniske specifikationer

EAN: 4069941013230
Surface: bright
Designation: End mill CR 200 for fibre-reinforced plastics
Helix angle: 5
Diameter range: 4.000 mm – 12.700 mm
Feed direction: with drilling
Product family: CR 200
Back rake angle: 10
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Indicator new/addition: New
Number of cutting edges range (from/to): 6-8

Dimensioner og bestillingsnumre

Bestillingsnummer	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Tilgængelighed
6925 4.000	20.90 mm	36.00 mm	66.00 mm	6.00 mm	4.00 mm	På forespørgsel
6925 8.000	36.05 mm	36.00 mm	75.00 mm	8.00 mm	8.00 mm	På forespørgsel
6925 6.000	28.16 mm	36.00 mm	70.00 mm	6.00 mm	6.00 mm	På forespørgsel
6925 10.000	41.83 mm	40.00 mm	85.00 mm	10.00 mm	10.00 mm	På forespørgsel
6925 12.000	45.01 mm	45.00 mm	93.00 mm	12.00 mm	12.00 mm	På forespørgsel
6925 4.762	21.10 mm	35.00 mm	63.50 mm	6.35 mm	4.76 mm	På forespørgsel
6925 6.350	28.81 mm	35.00 mm	70.00 mm	6.35 mm	6.35 mm	På forespørgsel
6925 9.525	37.50 mm	36.00 mm	76.00 mm	9.53 mm	9.53 mm	På forespørgsel
6925 12.700	40.50 mm	45.20 mm	88.90 mm	12.70 mm	12.70 mm	På forespørgsel