← Katalog
Hold musen over billedet for at zoome
3182
Hard multi-tooth end mill GH 100 H
Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093665452, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 55, Length picto milling: long, Number of cutting edges range (from/to): 6-8
Tekniske specifikationer
- EAN
- 4031093665452
- Type
- H
- Surface
- Signum
- Designation
- Hard multi-tooth end mill GH 100 H
- Helix angle
- 55
- Diameter range
- 6.350 mm – 19.050 mm
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- long
- Number of cutting edges range (from/to)
- 6-8
Dimensioner og bestillingsnumre
| Bestillingsnummer | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Tilgængelighed | Forespørg pris |
|---|---|---|---|---|---|---|---|
| 3182 6.350 | 24.00 mm | 39.50 mm | 63.50 mm | 6.35 mm | 6.35 mm | På forespørgsel | |
| 3182 12.700 | 31.50 mm | 44.70 mm | 76.20 mm | 12.70 mm | 12.70 mm | På forespørgsel | |
| 3182 19.050 | 46.00 mm | 55.60 mm | 101.60 mm | 19.05 mm | 19.05 mm | På forespørgsel | |
| 3182 15.870 | 39.00 mm | 49.90 mm | 88.90 mm | 15.88 mm | 15.88 mm | På forespørgsel | |
| 3182 7.940 | 27.20 mm | 36.30 mm | 63.50 mm | 7.94 mm | 7.94 mm | På forespørgsel | |
| 3182 9.520 | 28.20 mm | 35.30 mm | 63.50 mm | 9.53 mm | 9.53 mm | På forespørgsel |