← Katalog
Hold musen over billedet for at zoome
3192
Hard profile cutter with Torus grind GF 300 T
Hard profile cutter with Torus grind GF 300 T. Designation: Hard profile cutter with Torus grind GF 300 T, Diameter range: 4.763 mm – 15.875 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093665780, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 30, Back rake angle: -7, Length picto milling: extra long, Number of cutting edges range (from/to): 4
Tekniske specifikationer
- EAN
- 4031093665780
- Type
- H
- Surface
- Signum
- Designation
- Hard profile cutter with Torus grind GF 300 T
- Helix angle
- 30
- Diameter range
- 4.763 mm – 15.875 mm
- Back rake angle
- -7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- extra long
- Number of cutting edges range (from/to)
- 4
Dimensioner og bestillingsnumre
| Bestillingsnummer | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Tilgængelighed | Forespørg pris |
|---|---|---|---|---|---|---|---|
| 3192 9.520 | 19.02 mm | 38.10 mm | 76.20 mm | 9.53 mm | 9.53 mm | På forespørgsel | |
| 3192 15.870 | 31.40 mm | 50.80 mm | 127.00 mm | 15.88 mm | 15.88 mm | På forespørgsel | |
| 3192 6.350 | 12.98 mm | 38.10 mm | 76.20 mm | 6.35 mm | 6.35 mm | På forespørgsel | |
| 3192 12.700 | 25.40 mm | 44.45 mm | 114.30 mm | 12.70 mm | 12.70 mm | På forespørgsel | |
| 3192 4.760 | 9.80 mm | 38.10 mm | 63.50 mm | 6.35 mm | 4.76 mm | På forespørgsel | |
| 3192 7.940 | 16.10 mm | 38.10 mm | 76.20 mm | 7.94 mm | 7.94 mm | På forespørgsel |