← Katalog
Hold musen over billedet for at zoome
3895
Ratio end mill RF 100 H
Ratio end mill RF 100 H. Designation: Ratio end mill RF 100 H, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4049844020290, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 40/42, Back rake angle: -3, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA
Tekniske specifikationer
- EAN
- 4049844020290
- Type
- H
- Surface
- Signum
- Designation
- Ratio end mill RF 100 H
- Helix angle
- 40/42
- Diameter range
- 6.000 mm – 20.000 mm
- Back rake angle
- -3
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 4
Dimensioner og bestillingsnumre
| Bestillingsnummer | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Tilgængelighed | Forespørg pris |
|---|---|---|---|---|---|---|---|
| 3895 10.000 | 28.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | På forespørgsel | |
| 3895 20.000 | 48.60 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | På forespørgsel | |
| 3895 8.000 | 23.80 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | På forespørgsel | |
| 3895 16.000 | 40.48 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | På forespørgsel | |
| 3895 12.000 | 33.20 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | På forespørgsel | |
| 3895 6.000 | 16.60 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | På forespørgsel |