← Katalog
Hold musen over billedet for at zoome
4262
Ratio end mill RF 100 VA
Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4049844100688, Cutting material: Solid carbide, Surface: nanoA, Product family: RF 100 VA, Type: N, Helix angle: 35, Back rake angle: 7, Length picto milling: medium, Number of cutting edges range (from/to): 4, Type of machine interface: ~HB
Tekniske specifikationer
- EAN
- 4049844100688
- Type
- N
- Surface
- nanoA
- Designation
- Ratio end mill RF 100 VA
- Helix angle
- 35
- Diameter range
- 6.350 mm – 25.400 mm
- Product family
- RF 100 VA
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- medium
- Type of machine interface
- ~HB
- Number of cutting edges range (from/to)
- 4
Dimensioner og bestillingsnumre
| Bestillingsnummer | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Tilgængelighed | Forespørg pris |
|---|---|---|---|---|---|---|---|
| 4262 9.520 | 52.50 mm | 49.10 mm | 101.60 mm | 9.53 mm | 9.53 mm | På forespørgsel | |
| 4262 12.700 | 62.00 mm | 45.20 mm | 114.30 mm | 12.70 mm | 12.70 mm | På forespørgsel | |
| 4262 25.400 | 75.00 mm | 58.00 mm | 127.00 mm | 25.40 mm | 25.40 mm | På forespørgsel | |
| 4262 7.940 | 44.50 mm | 38.00 mm | 82.50 mm | 7.94 mm | 7.94 mm | På forespørgsel | |
| 4262 19.050 | 71.00 mm | 51.60 mm | 127.00 mm | 19.05 mm | 19.05 mm | På forespørgsel | |
| 4262 15.870 | 69.00 mm | 48.40 mm | 127.00 mm | 15.88 mm | 15.88 mm | På forespørgsel | |
| 4262 6.350 | 38.50 mm | 44.00 mm | 82.50 mm | 6.35 mm | 6.35 mm | På forespørgsel |